Kershaw 7007 Natrix Knife Review

Kershaw knives was founded in 1974. Their purpose was to design and manufacture tools that knife users would be proud to own, carry, and use. To make sure that their users were proud to carry their knives, they knew that they must make each and every knife with the highest quality materials and manufacturing tools.

Kershaw also has a commitment to innovation. Because of this, Kershaw has pioneered the use of many of the technologies and advanced materials that are the standard in today’s market. Some of their best innovations have been the SpeedSafe assisted opening knives. They also had the idea to create knives that can have interchangeable blades with their Blade Traders. One of their most recent innovations is their Composite Blade technology, which actually combines two steels into one blade. This gives the user the best of both worlds because they can have one steel by the sharpened edge that provides them with a fine edge and long lasting edge retention, but then still have a strong spine, because they can use a stronger steel on that portion of the blade. Because one of their major drives is to keep innovating bigger and better technologies, they will constantly have excellent knives in the market.

Kershaw Knives is actually a sub brand of Kai USA, Ltd. Kai has been Japan’s leading blade producer for over 100 years now. This larger company also vows to take an innovative approach to their products, product development, marketing, and distribution functions.

Kershaw says, “If this is your first Kershaw, be prepared. You just may be back for more. If it’s not your first Kershaw, welcome back.”

Kershaw has just released a brand new knife, and it is going to be a showstopper. They named it the Natrix.

 

The Blade:

The blade on the Natrix is made out of 8Cr13MoV steel. There is actually a series of Cr stainless steels. The best in the series is the 9Cr steel, with 8 falling right behind it. This is a Chinese stainless steel that is comparable to AUS 8 stainless steel. However, 8Cr13MoV steel is a little bit softer than AUS 8 steel and has a shorter edge retention span that AUS 8 steel. 8Cr13MoV steel is more prone to corrosion than AUS 8 steel as well. Its biggest boast is how inexpensive it is. So while this steel will be able to get the job done, it is not going to excel at anything. With knife steels, you get what you pay for. So while this steel is a bargain and is going to keep the cost of the Natrix down considerably, you will have a lacking of quality. Another excellent feature about this steel is that it is extremely easy to sharpen. So while it does dull quickly, sharpening will be a breeze. With this type of steel, the better the heat treatment on it, the better the quality of the blade.

The blade on the Natrix has been finished with a Stonewash finish. This is when the steel is rolled around with an abrasive material, usually small pebbles. After that portion of the process, it is smoothed over. This finish gives a slightly textured look to the blade, so it hides scratches and fingerprints very well. Because of how well it hides scratches and fingerprints, the Natrix’s blade will have to be polished less.

The blade on the Natrix has been carved into a drop point blade shape. This blade shape is the most versatile out of all the blade shapes. The shape is formed because the back, or unsharpened, edge of the blade slowly curves to meet the sharpened edge of the blade at a lowered point. This lowered point allows you to have more control over your knife. This is one of the reasons why a drop point blade shape is so popular with hunters—they can easily skin their game without having to worry too much about nicking the inner organs or ruining the quality of their meat. The lowered tip also lets you perform precision work because of how much control you have over your blade. The lowered point also makes the tip broader than you would find on other knives. This gives the knife more strength and durability because the tip is less likely to snap or break. One of the only drawbacks to this shape of knife comes from this lowered tip: because it is more broad, you cannot pierce or stab with this shape of knife. Another reason that the drop point blade shape is so durable is because it has such a large belly. This belly allows you to perform many tasks and makes this blade perfect for everyday use. The drop point blade shape is perfect for any knife lover who wants to be prepared for any situation. Your knife is going to be able to take on almost anything.

 

The Handle:

Kershaw Natrix
Kershaw Natrix

The handle on the Natrix is made out of black G10. This is a laminate composite that has been made out of fiberglass. G10 is similar to carbon fiber in its properties, although carbon fiber is a slightly superior material. However, you can get a G10 handle for a fraction of the price that a carbon fiber handle would be. The tradeoff between a slightly less quality handle, but a big chunk of money is usually worth it for knife users. G10 is made by a manufacturer that takes layers of fiberglass cloth and soaks them in resin. This material is then compressed and baked under pressure. G10 is crazy hard, tough, strong, and lightweight. G10 is even considered to the be toughest out of all the fiberglass resin laminates. G10 is even stronger than the popular material Micarta. Because G10 does not provide the user with a super steady grip, the manufacturer will usually add checkering or a different pattern to give the user more texture. On the Natrix, Kershaw has added a small checkered pattern that will provide the user with a great grip. Unfortunately, G10 does have a tendency to be brittle, so it might crack if hit with a sharp or hard object. Another drawback to having a G10 handle is that it doesn’t have a ton of personality. Many people believe that it lacks elegance and looks pretty plastic-y. Because G10 is so strong, hard, and lightweight, this is a very common material found on tactical knives. The Natrix handle has been 3D machined and chamfered to fit comfortably in your hand, even with long periods of use.

On the front of the handle, there is an oversized pivot that adds a unique look and obvious focal point of the knife. When you look at the back of the handle, the Sub-Frame Lock secures the blade, while also created a dramatic, contrasting line on the back. All in all, this handle has a sleek, modern look to it.

 

The Pocket Clip:

The pocket clip that comes with the Natrix is custom drilled. The handle has pre drilled holes so the user change which side the clip is on, depending on if you are left or right handed. However, you can only carry this knife tip-up, as it has not been drilled to reverse to tip down carry. This pocket clip is also a deep carry pocket clip, so you can be sure that your knife is safe and secure deep in your pocket. Another benefit that many people enjoy about the deep carry pocket clip is that it is easier to conceal your knife than with a regular pocket clip.

 

The Mechanism:

The Natrix is a manual flipper knife. This type of mechanism works because there is a small protrusion, on the Natrix this protrusion is triangular shaped, that comes out of the knife’s spine when it is in closed positon. To deploy the knife, you push down on this protrusion and it flips the blade open. This mechanism keeps your fingers out of harm’s way during the entire process, so you are in a safer position than with other manual mechanisms. And as a cherry on top, this flipper mechanism allows you to easily open the Natrix with only one hand.

This knife also features the SpeedSafe Assisted Opening. This mechanism allows you to open the knife quickly and easily.

The Natrix also sports a Sub-Frame Lock. One side of the lightweight handle, it is fitted with a steel plate integral to the frame; it is the part of the frame that moves behind the blade to lock it into position during use. With the Sub-Frame Lock, the knife can be large, yet a lighter knife, with an even more secure lock than you would find on other knives. Because of this Sub-Frame Lock, Kershaw was able to keep the weight of the Natrix down while still providing you with a large blade.

 

The Specs:

The blade on this knife is 3.25 inches long. When the Natrix is in opened position, it measures in at 7.5 inches long, sporting a closed length of 4.25 inches long. This knife only weighs a mere 2.9 ounces.

 

Pros of the Kershaw Natrix:

  • The steel chosen for this knife is very inexpensive.
  • The steel chosen for this knife is easy to sharpen.
  • The stonewash finish on this blade easily hides scratches and finger prints.
  • The drop point blade shape has a very controllable tip.
  • The drop point blade shape has a very strong and durable tip.
  • The drop point blade shape is one of the most versatile blade shapes because it also sports a large belly.
  • The blade shape is perfect for everyday purposes.
  • The handle is strong, tough, and lightweight.
  • The handle has been 3D machined to fit comfortably in your hand.
  • The pocket clip is reversible, helping to make this knife ambidextrous,
  • The pocket clip is deep carry, so you can easily conceal your knife while keeping it safe and secure.
  • The flipper mechanism keeps fingers out of the way and safe.
  • The flipper mechanism opens quickly and efficiently.
  • The Natrix sports the Sub-Frame Lock which allows the weight of the knife to be reduced significantly while still providing you with a large, useable blade.
  • The flipper mechanism sports the SpeedSafe Assisted Opening.

 

Cons of the Kershaw Natrix:

  • The drop point blade shape does not allow you to easily pierce or stab.
  • The pocket clip cannot be reversed for tip down carry.

 

Conclusion:

Kershaw Knives have been designing and producing exceptional, innovative knives for years. They have created many of the features that are now commonly found on knives. They have also helped to set the standard of what people expect from their pocket knives and other tools. Because of this, you know that when you purchase a Kershaw knife, you are getting the best tool for you and your needs. With one of their newest knives, the Natrix, you can expect that same level of quality and same amount of innovative technologies to complete your perfect knife.

To start off creating such a great knife, they gave it a good blade that also helps to keep the price of the entire blade down. This steel is easy to sharpen although it doesn’t excel in many other aspects. To ensure that this knife is versatile and can be used for almost any purpose, Kershaw ground it into the drop point shape. The steel was then finished with a stonewash finish, which does help cut down on maintenance. To complement the blade, Kershaw added a G10 handle which is tough, strong, durable, and still very lightweight. As the perfect bonus to this manual flipper, they added a deep carry, reversible pocket clip. This knife is going to be able to assist you in all of your everyday needs. This is a great budget option for your perfect every day knife–get yours here at BladeOps.

 

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Launch 7 Automatic Knife Review

Kershaw was founded in 1974. Since the very beginning, they have had one mission: to design and manufacture tools that knife users would be proud to won, carry, and use. Inspired by this mission, Kershaw has built each of their knives with the highest quality. Kershaw chooses appropriate, high quality materials. When you pair the great materials with intensive craftsmanship, you get true masterpieces. Kershaw also has a commitment to innovation. They have actually pioneered many of the technologies that are today’s standard in the knife community. Some of their most popular innovations have been the SpeedSafe Assisted Opening Knives, knives with interchangeable blades thanks to the Blade Traders, and one of the more recent ones is the Composite Blade technology. This last technology allows Kershaw to combine two different types of steels into one blade. This lets the user experience the best of both worlds with their blade. Kershaw has combined two steels to create a knife with excellent edge retention, but the other steel is known for strength, so they put the second steel on the spine. Because of their commitment to innovation, they will also keep innovating and bringing new and better technologies and materials to today’s knives.

One aspect of Kershaw’s reputation is that people will own a Kershaw knife for a lifetime. This is a true story, because they do use such great materials. Kershaw has said that even their inexpensive models are impressive.

Kershaw is actually a sub brand of Kai USA Ltd. Kai has been the leading blade producer of Japan for over 100 years now. The whole Kai community has vowed to take an innovative approach to product development.

Once you purchase one Kershaw knife, you are going to want more. So be prepared. Whether this is your first Kershaw knife or your 50th, the brand new Launch 7 Automatic knife will be a game changer.

 

The Blade:

The blade on the Launch 7 is made out of CPM 154 steel. The CPM means that it is made with Crucible’s Particle Metallurgy. CPM will result in a slightly superior steel that is tougher and has better edge retention than regular 154CM steel. Not only that, but because of the Powder Metallurgy, the steel has better toughness, while still being easier to sharpen than regular 154 CM steel. The last big benefit that the Powder Metallurgy is that the finished polished result will be better than the other kind of steel. CPM 154 steel is a pretty hard steel because the manufacturer has added Molybdenum. Although it has less Chromium content in the steel, the steel still sports excellent corrosion resistance. This steel has a good balance between being hard and being tough; you don’t really lose out on either side of the spectrum with CPM 154 steel. If you have the right equipment, this steel is not that hard to sharpen. This steel is often used in blades that are going to be used in heavier cutting or harder tasks, so you know that the Launch 7 will be able to stand up to what you throw at it. All in all, this is a high quality steel.

 

The coating on this steel is a Diamond Like Coating, or DLC. Coating finishes are good because they add corrosion and rust resistance while also preventing many reflections or glares. Because this specific DLC is black, you really won’t get any reflections or glares out of it. The only drawback to a coated finish is that it will eventually scratch off. There is not much you can do to stop it from scratching off over time or with heavy use. The harder the coating is, the longer it will take to scratch off. And the DLC is one of the absolute hardest coatings that you can find. Instead of just being “painted” on, it is actually chemically bonded to the steel itself. Because of this, you get a stronger and more durable blade.

 

The blade on the Launch 7 has been ground into a clip point shape. Clip points are a great blade shape option if you are hoping to be able to use your knife for any task. Clip points are a successful all-purpose blade shape. The blade shape is formed by having the unsharpened edge of the blade run straight from the handle until it stops about halfway up the blade. Once it stops, it actually drops and continues to the point of the knife. This drop almost looks like that portion of the blade has been cut out, or clipped off, which is where it this blade shape got its name. On the Launch 7, this cut out portion is straight. Because the point on this blade shape is lowered, you have more control over the blade and tip. This is a great benefit if you are hoping to perform detail work with the Launch 7. While this sounds very similar to the drop point blade style, this shape has a fine and sharp point, unlike the broad point of the drop point. This is an added benefit because you have a much better ability to stab with a clip point. However, it is also a drawback, because this thin tip is fairly weak and much more likely to break off. Another fantastic feature about the clip point shape is that it sports a large belly that is great for slicing.

Kershaw Launch 7 Auto
Kershaw Launch 7 Auto

The Handle:

The Launch 7 sports an anodized aluminum handle. The anodization process is the most common finish for an aluminum handle. While the aluminum handle is already extremely durable and hard, the anodization process does add a smidge of extra protection. However, even though the aluminum is very durable, it is prone to scratching or dinging. The anodization process helps to add a layer of protection against the scratches. Another, more obvious, benefit of having the aluminum on this handle anodized is that it creates a new color on the aluminum. This is not a coating, because it actually molecular draws out a different color. On this specific knife, the anodization process has turned the aluminum into a dark gray. A drawback to an aluminum handle that anodizing cannot fix is that aluminum is a very cold metal. If you are hoping to use the Launch 7 in a cold environment, just be prepared and either have gloves or be ready for the handle to feel like it is biting into your skin. One characteristic of aluminum that many knife lovers enjoy is that it has a very hefty feel to it. When you are using a knife with an aluminum handle, you feel like it has weight behind it and that it will be able to stand up to your hardest tasks. However, aluminum is a very low density metal, so it is very lightweight. Because of this, you will get the hefty feel that you crave, but the handle won’t end up weighing the knife down, like a stainless steel handle would. The last key aspect of having an aluminum handle that we will touch on is that aluminum is a slippery material. To provide you with a little bit extra grip, Kershaw has drilled four small arches into the bottom portion of the handle. This also provides the handle with an industrial look to it. Kershaw has also drilled a deep finger groove into the handle to provide you with extra grip while you are using this knife. Although the handle looks like all angles and edges, it actually fits comfortably in your hand and will stay comfortable even after long periods of use.

 

The Pocket Clip:

The pocket clip on this knife is black to match the blade and hardware. The Launch 7 has pre drilled holes in the handle that enables the user to rotate the pocket clip four different ways. You can either carry the knife tip up or down, or left or right handedly. That is a very convenient feature because it allows you to carry your knife as comfortably as possible. Plus, it is ambidextrous.

 

The Mechanism:

This knife is an automatic knife. Because of this, make sure that you know your local knife laws before buying or carrying the Launch 7. Automatic knives, or switchblades, have strict laws surrounding them. An automatic knife has a spring taut spring inside of the handle. When the button is pushed, the spring releases and the knife opens. Switchblades can open very quickly and very efficiently. This knife also features the Push-button Lock. This mechanism locks the blade open during use, so that you don’t have to worry about the blade folding while in use. The Push-button Lock also releases with the push of a button for storage. When you are ready to close an automatic knife, you unlock the knife, push down the deploy button, and manually fold the knife closed.

 

The Specs:

This knife has a blade length of 3.75 inches long. When the Launch 7 is opened, the knife measures in at 8.6 inches long, with a closed length of 5 inches. This knife weighs in at 3.2 ounces.

 

The Extras:

The Launch 7 was made in the USA, which is a big bonus. Tim Galyean is the designer behind this knife. There is also an integrated back spacer on this knife.

 

The Pros of the Launch 7:

  • The steel is a high quality steel with a great balance of strength and toughness.
  • With the right equipment, this steel is very easy to sharpen.
  • The steel has great edge retention.
  • The DLC is the best coating that you can get and will stay on the longest.
  • The DLC helps to cut down on reflections and glares while also providing corrosion resistant properties.
  • The clip point shape offers a big belly that is great for slicing.
  • The clip point shape can stab easily.
  • The clip point shape is a great all-purpose blade shape that is going to get the job done.
  • The lowered tip is great for performing detail work.
  • The aluminum handle has been anodized helping to add strength and durability.
  • The anodized aluminum is less prone to scratches than plain aluminum.
  • The aluminum handle is strong, tough, and durable.
  • The aluminum handle gives a hefty feel without adding too much weight.
  • The pocket clip is four way reversible.
  • The automatic mechanism opens quickly and efficiently.
  • The knife sports the Push-button Lock.
  • Made in the United States of America.

 

Cons of the Launch 7:

  • The DLC will eventually scratch off, just like any other coating finish.
  • The clip point shape has a weak tip that is prone to breaking off.
  • The aluminum handle is prone to scratches and dings.
  • The aluminum handle is pretty slick.
  • The aluminum handle will feel super cold in your hand when using it in a colder environment.
  • Because it is an automatic knife, it will not be legal in all states or areas.

 

Conclusion:

Kershaw has been around for a little over four decades now and since the very beginning they have been producing innovative and ground breaking new technology. Their knives have helped to set the new standard in the current knife market. Kershaw’s goal is that when you purchase a knife from them, you can own that knife for your lifetime. They also know that if it is your first knife, you will be coming back for more, and if it is a second, third, or maybe even tenth knife, that you already appreciate the quality that is Kershaw.

To create their newest in their knife collection, they started off with a high quality steel that is strong while still being tough, very durable, maintains an edge well, and is still relatively easy to sharpen. They threw on a Diamond Like Coating and ground the steel into a versatile clip point shape. To match the excellent blade, they added a durable aluminum handle in a dark gray color. The four-way reversible pocket clip is an excellent added bonus to this automatic knife. The Launch 7 will be the perfect addition to your knife collection.

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Eris Spring Assist Knife Review

Kershaw was founded in 1974 with a founding mission to design and manufacture tools that knife users would be proud to won, carry, and use. To do so, Kershaw knew that each and every one of their knives must be of the highest quality. Whether it’s a hardworking pocketknife, a hunting knife, or a special collector’s edition, Kershaw always chooses appropriate, high quality materials and is dedicated to intensive craftsmanship. Along with extremely tight tolerances and state of the art manufacturing techniques, this ensures that Kershaw knives provide a lifetime of performance.

Kershaw is actually a sub brand of Kai USA Ltd. For over 100 years now, Kai has been Japan’s premier blade producer. Kai takes an innovative approach to product development based on the close coordination of research and development, production, marketing, and distribution functions.

Just like Kai, Kershaw also has a commitment to innovation. In fact, Kershaw has pioneered the use of many of the technologies and advanced materials that are today standard in the knife industry. As some examples, Kershaw’s assisted opening knives were the first to market. The technology behind that is the Speed Safe. Next, Kershaw introduced the concept of knives that have interchangeable blades in their Blade Traders. Lastly, they released the Composite Blade technology, which works to give users the best of both worlds by combining two steels into one blade. This means that the user can get the longest lasting edge as well as a crazy strong spine.

Kershaw has award winning technologies and uses advanced materials, so when you are carrying a Kershaw, you know that you are carrying the real thing. This means that your blade has value and plenty of it. Even Kershaw’s more inexpensive models are impressive. This is because everything about a Kershaw is solid, crafted, and reliable. You know that your Kershaw is going to last a lifetime.

Kershaw has recently released a brand new knife, and it is going to be a game changer. Kershaw named it the Eris. The Eris got its name because Eris was in the Greek pantheon and was always known as the troublemaker. Eris was always stirring up jealousy. Now, you can always stir up jealousy whenever you take the Eris out of your pocket.

 

The Blade:

To keep the overall cost of the Eris down, Kershaw chose to use 8Cr13Mov steel. They finished this blade with a stonewash finish that has satin flats. 8Cr steel comes from a Chinese steel series. Out of the series, 9Cr steel is the strongest, most durable, and long lasting. 8Cr is close behind it. The biggest advantage that 8Cr steel boasts is how inexpensive it actually is. This works really well to keep down the overall cost of the knife. This is considered an average that is going to get the job done, but it isn’t going to excel at anything it does. You can get a very fine edge on this steel, and it will last awhile. And, because of the softness of this steel, it is extremely easy to sharpen. This steel is also considered a stainless steel, so it does resist rust and corrosion well, just not as well as a premium steel would have. On the flip side, you do get what you pay for with blade steel, so like I said, this steel does not excel at anything.

Kershaw chose to finish the blade with a stonewash finish and satin flats. This means that the majority of the blade does have a stonewash finish. This finish is created by tumbling the steel around with an abrasive material, which is almost always small pebbles. This creates a very textured, well-worn look on your blade. The next step in the process is to smooth out and polish the steel. This steel does cut down on glares and reflections well, but the biggest advantage to a stonewash finish is how well it camouflages scratches and fingerprints that accumulate overtime. This finish definitely preserves the look of the blade overtime.

The flats of the Eris have been finished with a satin finish. This is one of the most common finishes, because it provides you with a very classic look. However, in terms of what this finish can accomplish, it seems to fall right in the middle. It does work to cut down on glares and reflections, and it isn’t as shiny as some. However, it isn’t completely matte either. This finish is reliable and classic. This finish works to show off the lines of the knife and is accomplished by sanding the steel in one direction with increasing levels of an abrasive material.

The steel has been carved into the favorite blade shape: a drop point blade shape. However, this particular blade boasts an attractive top swedge. The drop point shape is easily one of the most versatile blade shapes on the market. Almost all of its features work to accomplish a plethora of tasks. The unsharpened edge slowly curves down to meet the sharpened edge, creating a lowered point. The lowered point is the features of this blade shape that makes it so popular among hunters; it provides you with exceptional control over your cuts. Plus, the lowered point means that it is going to be thicker than a regular point, providing you with plenty of strength. This means that you won’t have to worry about the tasks that the Eris will be able to take on, because this blade shape is designed to take a beating. One of the last reasons that this blade shape is so useful is that the sharpened edge provides you with a large belly and plenty of length for slicing. This is the key feature that makes the Eris great for your everyday carry knife.

Kershaw 1881 Eris Knife
Kershaw 1881 Eris Knife

The Handle:

The handle is made out of stainless steel. This has a handful of advantages and a handful of disadvantages to it. Let’s start with the advantages. First of all, this is a very durable handle material that can easily take a beating and help you perform the harder tasks that you are presented with. Secondly, this type of handle material is very resistant to rust and corrosion which does work to cut down on maintenance time. On the flip side, this is a heavy material that is going to add a decent chunk of weight to the Eris. Secondly, this is a slippery material that does take some manufacturing to provide you with a great grip. However, you aren’t going to have a solid grip on this knife in some environments.

This handle has been finished with a Titanium CarboNitride coating. This is sometimes known as a TiCN coating. This is not one of the more common coatings, so we’ll go into depth about it. This type of a coating is a thin film coating that was developed from Titanium Nitride or TiNi. This type of finish offers a slightly higher hardness compared to TiN and can show a slightly lower friction coefficient in many applications. This type of finish really helps to increase the handles abrasive wear resistance and help make it last for years.

The finger groove on this handle is shallow and elongated, but to help protect your finger, Kershaw has added a finger guard. Another big benefit about this handle is that there has been a lanyard hole carved into the butt of the handle. There are so many benefits to tying a lanyard onto your pocket knife, and this hole will come in handy in a variety of different situations.

 

The Pocket Clip:

The pocket clip is long and silver, which does add a nice contrast against the dark gray handle. The pocket clip matches the rest of the hardware on this knife. It is held into place by two small screws. This is a reversible pocket knife. The handle has been drilled to carry this knife either left or right handedly. However, the handle has only been drilled to attach the pocket clip in a way that requires you to carry your knife tip up.

 

The Mechanism:

This is an assisted opening knife that sports Kershaw’s Speed Safe assisted opening mechanism. Speed Safe is a patented system that assists the user to smoothly open your knife with a manual pull back on the flipper. This mechanism works by using a torsion bar. When the knife is closed, the torsion bar helps prevent the knife from being opened by “gravity”, it creates a bias toward the closed positon. To open the knife, the user applies manual pressure to the flipper to overcome the resistance of the torsion bar. This enables the torsion bar to move along a track in the handle and assist you to open the knife. The blade opens smoothly and locks into position, ready for use. Because the Eris features the Speed Safe mechanism, you can easily open this knife one handedly. And no, this knife is not a switchblade, even though it will feel as smooth as one.

This knife uses a flipper mechanism to assist you in opening the knife. The flipper is a small protrusion that juts out of the spine of the handle when the blade is closed. You push down on the flipper, which puts enough pressure on the blade to flip it open. One of the benefits about the flipper is that it keeps your fingers out of the way and safe from harm when you are opening the knife.

The Eris also features a Frame Lock, which is a portion of the handle that moves behind the blade to lock it into position during use. This is a safety feature of the knife.

 

The Specs:

The blade on this knife measures in at 3 inches long. When the Eris is opened, it measures in at 7.5 inches long, and when the Eris is closed, it measures in at 4.1 inches long. Because of the hefty handle, this is a much heftier knife—weighing in at 4.7 ounces.

 

Conclusion:

Kershaw designs their knives to last a lifetime with you. They are designed to make you proud to carry them, so Kershaw uses appropriate high quality material on all of their knives. They have plenty of budget options, one of which is the Eris, but you can still be proud to carry it. Kershaw will still use the high quality materials that will help you get the job done and help this knife last.

Like I previously mentioned, the Eris was named after the troublemaker in the Greek Pantheon, the man that was always stirring up jealousy. This is because now you will be the one stirring up jealousy every time you pull out this knife to show it off. But, what I didn’t mention was that this knife actually has two namesakes. The other one is the celestial Eris, which is the most massive dwarf planet in our solar system. So while this knife looks large and gives you a solid and hefty feel, it won’t be one to weigh you down.

Kershaw believes that everyone should be able to afford a high quality pocket knife, so they work to give you appropriate high quality materials. To start out with one this knife, Kershaw used 8Cr13MoV steel. This is a steel that will be able to get the job done, while also reducing the overall cost of this knife. To finish off the blade, Kershaw chose to use a stonewash finish with satin flats. The stonewash finish provides this knife with a well-worn, texturized, rugged look. The satin flats work to provide a hint of elegance to this knife, because you need a hint of elegance when the knife gets its name from a God and a Celestial planet. The handle is durable and rust resistant, but does add a chunk of weight to the knife. The handle has been finished with a matte gray titanium carbo-nitride coating, which drastically improves the hardness of this handle. This knife actually has two cherries two top it off, one being the lanyard hole and the other is the reversible pocket clip.  Order your Eris today on our website here.

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw 1220 Reverb Knife Review

The Kershaw Reverb

 

Kai USA, Ltd has been a premier blade producer for over 100 years now. Kai makes sure that they take an innovative approach to product development. They make sure that they take an innovative approach to coordination of research and development, production, marketing, and distribution functions.

Kershaw is a sub brand of Kai USA, ltd and they also always take an innovative approach to every part of their production. In fact, Kershaw has pioneered many of the technologies and materials that are now the standard in the knife industry. For example, Kershaw’s Speed Safe technology were the first assisted opening knives in the market. Another example is their interchangeable blades in Kershaw’s Blade Traders. And one of their most recent groundbreaking innovations are Kershaw’s Composite Blade technology. This is when they combine two types of steel into one blade, which truly gives the user the best of both worlds. They can use a steel known for its edge retention on the edge of the blade and a steel known for its strength on the spine of the knife. Kershaw vows to keep innovating and bringing new and better technologies and materials to today’s knife making industry and knife suing public.

In 1974, when Kershaw was founded, they mission was to design and manufacture tools that knife users would be proud to own, carry, and use. To complete this mission, they know that all of their knives have to be made with the highest quality materials. They choose appropriate high quality materials and are dedicated to intensive craftsmanship. Kershaw has extremely tight tolerances and state of the art manufacturing techniques to ensure that Kershaw knives provide a lifetime of performance.

Kershaw knows that their knives are excellent and has said, “if this is your first Kershaw, be prepared. You just may be back for more. If it’s not your first Kershaw, welcome back.” One of Kershaw’s newest releases is called the Reverb, and it will sell you on Kershaw knives or just reinsure you about how great they are.

 

Kershaw 1220 Reverb
Kershaw 1220 Reverb

The Blade:

The steel that is used on the Reverb is 8Cr13MoV steel. This is a Chinese steel and actually comes from the Cr series of steels. The highest quality steel in this series is actually the 9Cr steel, with 8Cr steel falling close behind it. The biggest advantage about this type of steel is how inexpensive it is. When you are looking for a budget option that will get the job done, this is a great steel to go with. However, you do get what you pay for, so while the steel will be able to get the job done, it is considered one of the more average steels and won’t excel at anything. 8Cr steel is most commonly compared to AUS 8 steel; with AUS 8 steel being the superior out of the two kinds. 8Cr steel is a little softer than AUS 8 and doesn’t hold an edge as well. On the flip side, because it is a little softer, this steel is extremely easy to sharpen and a beginner would be able to excel at sharpening this type.

To make this steel harder and more durable, the finish that Kershaw chose is a PVD coating. This is a Physical Vapor Deposition coating, where the particles of coating are applied in a vacuum like environment. This type of coating is actually chemically bonded to the steel and vastly improves the hardness and durability of this steel. It has been said to make this steel scratch resistant. Because it is chemically bonded to the steel, it will not scratch off like any of the other coating finishes would. One of the last benefits about this type of coating is that there are no thicker deposits of the coating whereas a painted on coating could run or be applied unevenly. The PVD coating also provides you with protection against many of the elements which is perfect because this knife is designed for backpacking, camping, hiking, and other outdoor activities. The PVD coating on this knife is a dark gray color.

Kershaw used a different finish for the flats of the blade: a satin finish. A satin finish is used to enhance the lines of a steel and creates a slighter more matte look than if it had no finish on it. It does work to reduce the glares and reflections on the knife. This finish is created by sanding the steel with increasing levels of a fine abrasive. Because it takes time and work, it does add a little bit to the overall cost of the knife. The satin finish is a much lighter gray, almost silver, compared to the PVD coating, which creates a nice contrast.

The steel has been ground into a modified drop point blade shape. This blade shape is created by having the unsharpened edge of the blade slowly curve until it meets the sharpened edge creating a lowered point. The lowered point provides the user with more control over their cuts, which is why this is a popular blade shape among hunters. The lowered point also means that the point is going to be broader, and thus stronger than another point. Because of this, the drop point blade shape is able to take on a plethora of tasks that a different blade shape would not. The drop point style is one of the most versatile blade shapes that you are going to be able to buy, and one of the reasons for that is that it provides you with a large belly that has plenty of length of slicing or cutting. The belly is perfect for your everyday tasks. The drop point blade shape is going to help you be prepared for almost any situation, whether it is the common expected, everyday tasks or the completely unexpected or emergency situations.

 

The Handle:

The handle on this knife is made out of G 10 with a carbon fiber overlay front and a steel back. G 10 is laminate that is made of fiberglass. This material has very similar properties to carbon fiber, except that it can be produced for a much lower cost. To make it, the manufacturer takes layers of fiberglass cloth and then soaks them in resin, compresses them, and lastly bakes them under pressure. The material is very hard, tough, lightweight, and strong. G 10 is actually considered to be the toughest of all the fiberglass resin laminates. However, it is brittle. G 10 is a popular material because it is durable, lightweight, non porous and you can purchase it in a variety of colors.

The front overlay is made out of carbon fiber. This material is made when thin strands of carbon have been tightly woven and then set in a resin. This is an extremely strong material that is also lightweight. However, it is one of the other expensive materials. Even though it is such a strong material, it is also pretty brittle. This is because all of the fibers of carbon have been woven in one direction, so they are strong in that direction, but when they get stressed in other directions they start to break apart. This has a heavily textured pattern that looks like a woven basket.

The back of the handle is made out of steel. This is an extremely durable material that is also very resistant to corrosion. However, it is not as lightweight as the other two materials. In fact, it is one of the heavier materials. Steel is one of the more slippery materials, but because it is just on the back, you will still have an excellent grip on your knife.

The finger groove in this handle is extremely shallow, but on the front of the knife, there is a cut out from the front overlay and the back, so you can place your finger in this groove. Because of this, you will have fantastic grip on the knife, no matter what the weather is. For an outdoors knife, you need the best grip that you can get.

 

The Pocket Clip:

The pocket clip is long and skinny. It is an extra deep carry pocket clip. This means that it will always be safe and secure inside of your pocket, plus, with a deep carry pocket clip, it is easier to conceal. However, it is also a single position pocket clip. The knife has only been drilled to carry your knife right handedly and with the tip of your knife up.

 

The Extras:

The Reverb actually functions as a multi tool. This knife has been designed to be an outdoors knife, and to be a great outdoors knife, you have to be able to use both of your hands in many of the situations. But, you also need to be able to have quick access to your knife while ensuring that it remains secure when you are not using it. To fulfill all of these needs, Kershaw has added a Carabiner Clip onto the handle of the knife.

 

The Mechanism:

This is a fully manual opening knife. Kershaw says that it has no assist, even the Speed Safe assisting mechanism, and it opens the classic, old school way. In fact, this knife doesn’t even feature a flipper or a thumb stud mechanism. There is a slight thumb groove to get traction on the blade to be able to push it open. Other than that, it is fully manual.

This knife also features a frame lock mechanism. This is a portion of the handle (the knife feature) that moves behind the blade to lock it into position during use. This is a safety feature of the knife. Because of this frame lock, you won’t have to worry about it closing on you or fingers during the heavy duty use.

 

The Specs:

The bade on the Reverb is 2.5 inches long. When this knife is open, it has an overall length of 6.1 inches long, but when the blade is closed, it measures in at 3.25 inches long. Because of all the lightweight materials that were used on the blade and in the handle, and the slim and sleek design that the Reverb sports, this is a crazy light knife. It weighs in at 1.6 ounces.

 

Conclusion:

The reputation that Kershaw has earned over the past few decades is completely true. Kershaw knives are reliable and durable. This knife is going to be able to last a lifetime with you, through all of your outdoors adventures.

This is a super lightweight knife that is ideal for backpacking, camping, hiking, and other outdoor activities. With its lightweight design and no flipper or thumb stud to catch on anything, the Reverb is ready to go with you on your next outdoor adventure. The built in carabiner clip makes it easy to clip to backpack or harness.

To create such an excellent knife, Kershaw started out with steel that holds an edge for long periods of time and is a breeze to sharpen. Not only that, but the steel is extremely inexpensive and will keep the cost of this knife down considerably. To match the great blade, Kershaw had to design a perfect handle. They used G 10 to give you durability with a Carbon Fiber overlay. Both of these materials are durable and extremely light weight, which keeps the weight of the knife down considerably. This helps to make your knife light enough to take with you no matter where you go. The back scale of the handle is made out of durable, rust resistant steel. While this scale is much heavier than the other two handle materials, it doesn’t weigh the knife down because it is just the back scale.

The carabiner clip is the perfect edition to your new outdoors knife. The extra-long, extra deep carry pocket clip is just the cherry on top of a fantastic knife.

If you hike, camp, backpack, or spend much of your time in the outdoors, this is the perfect addition for your knife collection–find yours at BladeOps.

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Launch 3 Automatic Knife Review

Kershaw was established in 1974 and ever since, they have been making excellent knives. Kershaw is actually a sub brand of Kai USA Ltd. Kai is a known company, especially in Japan, where they have been the leading producer of premium blades for over 100 years now. Kai has a commitment to innovation; they take an innovative approach to their product development, their research, their production, even their marketing and distribution functions.

Kershaw, as a member of the Kai group also has a solid commitment to innovation. Interestingly enough, this commitment to innovation has spurred the technologies in the knife community. Kershaw helped to pioneer the use of many of these technologies and their work with advanced materials have become the standard in the knife industry. One of these technological advancements include the SpeedSafe assisted opening. One of the world’s favorite technological advancement is that they have created knives that have interchangeable blades with their Blade Traders. One of my favorites with these technological inventions is the Composite Blade technology. For example, Kershaw will create a blade that uses a steel known for its excellent edge retention near the sharpened edge of the blade. But, for the spine of the blade, they will use a steel that is known for its strength. Because of this new technology, you can truly get the best of both worlds when it comes to your blade.

Kershaw’s founding mission is to design and manufacture tools that knife users would be proud to own, carry, and use. To accomplish this mission, Kershaw has chosen to use the highest quality materials. They believe that if the knife isn’t up to your standard, then it is not up to their own standards.

Kershaw knives truly last a lifetime. And you know that when you are carrying a Kershaw knife, you have a lifetime companion that is able to stand up to the tasks that you throw at it. Kershaw has said, “if this is your first Kershaw, be prepared. You just may be back for more. If it’s not your first Kershaw, welcome back.” They know that their knives are excellent, and once you use your new Kershaw, you will also know just how excellent they are. One of their popular knives is the Launch. And they just released a new version of it. This is the Launch 3 Automatic.

 

Kershaw Launch 3 Auto Knife
Kershaw Launch 3 Auto Knife

The Blade:

The blade on this knife is made out of CPM 154 steel. This is a high end steel. There is regular 154 CM steel which is also a high end steel. The 154 CM steel has extra Molybdenum, so it is a very hard steel. Because of the strength behind it, it can hold an edge extremely well. Surprisingly enough, even though this steel has less Chromium, it has fantastic levels of corrosion resistance. Even though this knife has a very high level of strength, it is also very tough. The CPM in this steel name stands for Crucible Particle Metallurgy. This Particle Metallurgy makes finer carbide particles, which results in a slightly superior steel. This superior steel is tougher and has better edge retention than the classic 154 CM steel. This Particle Metallurgy also helps to more easily grind the steel. Although, the regular 154 CM steel is already relatively easy to sharpen. The finer carbide particles also allow for you to get a finer edge and the polished finish looks better than if it did not have this treatment done to it. This new version of the Launch 3 features a combo blade. This means that part of the blade is a plain edge, and the bottom part of the blade is a serrated edge. The combo blade gives you the best of both worlds, because you get the benefits of the serrated edge, while also not missing out on the advantages of having a plain edge.

One the older versions of the Launch 3, Kershaw used S30V steel instead of CPM 154 steel. This steel also is able to hold an edge for long periods of time. However, S30V steel has a higher resistance to rusting or corrosion. All in all, this is one of the best steels on the market, and is considered a premium steel. It has the perfect balance between hardness, toughness, and edge retention.  However, S30V steel is a more expensive steel, so with the slight downgrade, the knife is a little more affordable.

 

There are a couple of different finishes to this steel. The classic and newest Launch 3 design has a black Diamond Like Coating on it. This coating is not painted on the steel like many of the other styles of coatings. This is actually molecularly bonded to the steel, so while it will eventually scratch off, it won’t scratch off as fast as other coatings will. There are a few pros and cons to having a coating finish. One of the pros is that coatings provide a barrier between the steel and the oxygen, so rust and corrosion levels are cut down. Another pro is that they are usually a darker color, so reflections and glares are significantly cut down. However, the biggest con to having a coating finish is that they will all eventually scratch off. The harder the coating, the higher quality it is, which also means that it is more expensive. The DLC is one of the hardest and thus, the most expensive coating finishes on the market.

One of the other finishing options is a stonewash finish. On this version of the Launch 3, the blade is not black, but rather an even gray. The stonewash finish is created by tumbling the steel around with an abrasive material, which is usually small pebbles. After this, the blade is smoothed over and polished. This finish creates a textured, rugged look. The resulting color is an even, matte, gray finish. Because of the matte, glares and reflections are cut down. Another big benefit to the stonewash finish is that it easily hides fingerprints and scratches, which cuts down on maintenance time.

The last finish option available for this knife is a Black Oxide Coating. This coating blackens the steel and is used to add mild corrosion resistance. It also helps to minimize light reflections.

Like I previously said, these last two finishing options are finish options that are on the older versions of the Launch 3.

OD Kershaw Launch 3 Auto
OD Kershaw Launch 3 Auto

The shape of the blade on the Launch 3 is a drop point blade. The drop point blade shape is one of the most versatile blade shapes on the market. The shape is created by having the back of the blade slowly curve until it meets up with the sharpened edge. This creates a lowered point, which helps to give you more control over your cuts. Because it is lowered, it ends up having a broader tip, which provides more strength and durability behind the tip. This way, you can use the tip of your blade more confidently than you would otherwise be able to. The drop point blade shape is a fantastic option for your everyday blade carry, because it features such a large belly. This large area for slicing lets you complete all of your everyday tasks. One of the only drawbacks to this shape of blade is that the tip is broader than most, so you really don’t have many stabbing or piercing capabilities.

 

The Handle:

The handle on this new version of the Launch 3 is an aluminum handle. This is a very durable and strong material. One of the biggest benefits to this handle material is that it provides you with a very hefty feel without actually weighing the knife down. This is a lightweight material, because of how low density of a metal that aluminum is. However, aluminum is prone to scratches, so to combat the scratches, Kershaw anodized the handle. The anodization process is the most common finish for aluminum knife handles. This finish adds hardness and protection to the handle, so it will cut down on how many scratches the aluminum would normally wrack up. It also works to add a color to the handle, in this case, black. In older versions of the Launch 3, the anodization process has also added an Olive Drab color to the handle. Another drawback is that aluminum is a cold material, so if you are working in a cold environment, I would not recommend having a knife with this handle.

 

The Pocket Clip:

The pocket clip on this knife is black to match the rest of the handle. There are pre drilled holes in the handle that allow the user to reverse the pocket clip in four different directions. You can either carry your blade with the tip up or down, or change which whether or not you carry your blade left or right handedly. This is a big benefit because it allows you to carry your knife as comfortable as possible for each specific user.

 

The Mechanism:

This is an automatic knife, so like always, make sure that you know your local knife. Automatic knives, or switchblades, have some very strict laws surrounding them. They are not legal in every state or city, so be sure you can legally own this knife before purchasing and carrying. An automatic knife is a knife that has the blade stored inside of the handle. Also in the handle is a tightened spring. To deploy the knife, you push down the button and the spring untightens and the blade will pop out. On the Launch 3, the name of this mechanism is the Push-button Lock. This is when the blade is locked open during use, and when you push the button again, the lock releases and you are able to store your knife.

 

The Specs:

The Launch 3 Automatic was made in the United States of America. There is also an integrated back spacer on it. The blade on this knife is 3.4 inches long. When the Launch 3 is opened, it measures in at 7.8 inches, with a closed length of 4.4 inches. The Launch 3 weighs 3.4 ounces.

 

The Pros of the Launch 3 Automatic:

  • The high end steel is tough, strong, and has great edge retention.
  • The high end steel is also resistant to corrosion.
  • The DLC adds strength, durability, and increases corrosion resistance.
  • The DLC is one of the hardest coatings on the market, so it will add the most durability and take the longest to scratch off.
  • Has a combo edge.
  • The drop point shape is one of the most versatile blade shapes.
  • The drop point has a large belly with ample cutting room.
  • The drop point has a lowered point that is broader than most, giving you some of the most strength.
  • The aluminum handle is strong, durable, resistant to corrosion, and very lightweight.
  • The anodization process makes the handle more resistant to scratches.
  • The pocket clip can be reversed in four different directions.
  • This is an automatic knife, which will deploy faster than other knives.
  • This is made in the USA.

 

Cons of the Launch 3 Automatic:

  • The steel is a little tricky to sharpen, unless you have the correct tools.
  • The DLC will eventually scratch off.
  • The drop point blade shape has a broad tip that takes away many of your piercing and stabbing abilities.
  • The aluminum handle will still get scratched, even with the anodization.
  • The aluminum handle will feel extremely cold if you are in a cold environment.
  • Automatic knives are not legal in many areas of the United States.

 

Conclusion:

Kershaw is a trusted, reliable knife company that will provide you with one of the most quality knives that you have ever used. To create their newest knife, they used a high end blade steel and cut it into one of the most versatile blade shapes. To compliment the great blade, they added a durable handle. Everything combines to make a truly exceptional knife. If you have liked the previous Launches, you are going to love this version of the Launch 3.

 

 

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw 5520 Malt Assist Knife Review

Kershaw was established in 1974 and has been designing and creating fantastic knives ever since. When they founded the company, they had the drive to create and manufacture tools that knife users would be proud to own, carry, and use. To satisfy their drive, Kershaw is sure to use appropriate, high quality materials and they are dedicated to intensive craftsmanship. Something that Kershaw has accomplished is that when you purchase one of their knives or tools, you will be able to own that product for a lifetime, because Kershaw products last decades.

One of Kershaw’s goals is a commitment to innovation. Kershaw has actually pioneered many of the technologies and advanced materials that are now the standard in the knife community. Some of these innovative technologies include the SpeedSafe assisted opening knives, the knives that have interchangeable blades because of their Blade Traders, and one of their newer technologies is the Composite Blade Technology. This last one is where they combine two different steel types to give you the best of both worlds. Kershaw explains that they can use a steel known for edge retention on the edge, but then use a steel known for strength on the spine of the knife. This way, you don’t have to compromise with strength or with edge retention on your blade.

Kershaw is actually a sub brand of Kai USA Ltd. Kai is also strongly committed to innovation while designing, creating, and manufacturing their knives. For more than 100 years, Kai has even been Japan’s leading blade producer.

Kershaw knows that if this is the first of their knives that you have purchased, you will be back. And if this is not your first, you already understand how quality, durable, and innovative their knives are. One of Kershaw’s newest releases is called the Malt.

Kershaw Malt
Kershaw Malt

The Blade:

The blade on the Malt is made out of 8Cr13MoV steel. This is a Chinese produced steel that actually comes from a series of steels. All of the steels in this series are known as Cr steels. The best in the series is the 9Cr steel, with 8Cr falling close behind. There are Cr steels less than 8, but it would be a waste of money and your time. 8Cr steel is comparable to AUS 8 steel. However, it is more prone to rusting or corroding than AUS 8 steel is. The 8Cr steel is also softer than AUS 8 steel. Because it is a softer steel, this steel is easily sharpened. Almost any beginner sharpener would be excellent at sharpening the 8Cr steel. It is a good thing that this steel is easily sharpened, because 8Cr steel does not retain its edge as well as a high quality steel would. One of the biggest advantages to having your blade made out of 8Cr13MoV steel is that it is an extremely inexpensive steel, which helps to keep the cost of the overall knife lower. While this steel is not the best steel that you can find, it does make a great option if you are on a tight budget. And, the better that the steel is heat treated, the higher quality this type of steel will be.

The steel on this knife is finished with a PVD coating. This is a Physical Vapor Deposition. This process is done by introducing the steel to a material vapor that can be reacted with different gases to form a thin coating. This process is completed in a vacuum environment. Some of the advantages to this type of coating is that because of how it is applied, you won’t get a buildup of your coating around the corners or edges, like some of the other types of coatings. Because the coating provides a barrier between the steel and the environment and air, this type of finish with prolong the life of the blade by preventing corrosion and rust. The higher the quality of the coating (PVD is a high quality coating) the more expensive it will be. However, the higher the quality of the coating, the more corrosion resistant the blade will be and it will have a better chance at lowering reflection. Because of this coating, maintenance type will be significantly cut down. The coating on the Malt creates a dark grey color. The blade is actually two toned, with part of it being dark grey and another part looking much more reflective and silver. The two tone look creates a very distinctive look to the Malt.

The steel on this knife has been carved into a modified tanto blade shape. The tanto blade shape has no curves and is instead made up of straight lines and sharp angles. Tanto’s aren’t meant to be used for everyday knives, but this modified tanto is going to be able to get the job done. Because the tip is thicker and carries more steel towards the tip, the point is very strong. It can dig, pry, and hammer while also being able to cut. Tanto’s also excel at piercing, even through some of the hardest materials. There are a couple of drawbacks to the tanto shape, one is that the tip is hard to control, so you aren’t going to want to perform detail work with this blade. Another drawback is that there is a lack of belly, making slicing a little bit trickier. However, on this modified tanto, while there is no curved belly, the angle towards the tip starts further back and will allow you to slice enough. The Malt has been designed as a great everyday knife and the modified tanto blade shape will help you get all your daily tasks done.

 

The Handle:

The handle on the Malt is made out of steel. This is a durable material that has great corrosion resistant properties. However, it is one of the heavier knife handle materials, and it will weigh the knife down considerably. A steel blade is also known for being pretty slick, so Kershaw had to get creative with how they added texture. The handle of this knife is also two toned, with the silver part being raised above the dark grey part. Because of this, you get more grip than you would have. The silver part also has grooves going down the length of the handle, which also work to add grip. There is light jimping on the bottom edge of the handle towards the butt. Kershaw has also added a deep finger groove into the handle, to provide you with a solid grip during harder tasks.

The handle has also been finished with a PVD coating. This is what has created the dark grey color to the handle. It also ensures that your handle will be a little more resistant to corroding or rusting, while also cutting down on the reflective properties that steel normally features.

Kershaw Malt, Back View
Kershaw Malt, Back View

The Pocket Clip:

The clip on the Malt is black, adding contrast against the two toned handle. There are pre-drilled holes in the handle that slows the user to reverse the pocket clip in four different directions. You can carry your knife tip up or tip down and also carry it left or right handed, helping to make this knife an ambidextrous option. This pocket clip is held in place by two small, black screws.

 

The Mechanism:

This is a flipper knife. The flipper is a protrusion on the back of the blade that the user can pull back on, which then flips the blade out of the handle in a quick and easy manner. The Malt features Kershaw’s classic SpeedSafe Assisted Opening mechanism. This mechanism allows you to open your knife quickly and safely. One of the many benefits of a flipper knife is that it keeps your fingers safe and out of the way during the entire process.

The Malt also sports a Frame Lock, which is a portion of the handle that moves behind the blade to lock it into position during use. This is a safety feature of the knife, because with it, you won’t have to worry about your knife folding shut, onto your hand, in the middle of use.

 

The Specs:

The blade on the Malt is 3 inches long. When this knife is opened, it measures sin at 7.1 inches long, with a closed length of 4.3 inches long. This knife weighs 4.6 ounces. This knife was designed by one of the most sought after custom knife makers: Gustavo Cecchini. He is known for his innovative knife technologies as well as the striking lines of his custom designs, which you can clearly see in the unique look of the Malt. The Malt features Gustavo’s classic sculpted style, but does sport a little something extra.

 

The Extras:

This knife actually doubles as a bottle opener. The flipper protrusion on this knife isn’t the typical sharks fin shape. It actually looks just like any bottle opener would. Because of this unique bottle opener shape, the flipper is able to open any bottle. Kershaw has said that this knife, “also has an interesting feature that (we admit) just may have been inspired by the fine brew we were sharing with Gus at the time”.

 

The Pros of the Kershaw Malt:

  • The steel chosen for this blade is extremely inexpensive, helping to make this knife affordable.
  • The steel on the blade is a breeze to sharpen.
  • The PVD coating helps to prevent rusting and corrosion.
  • The PVD coating helps to cut down on reflections and glares.
  • The PVD coating won’t build up around the corners and edges of your blade and handle, because of the unique way that it is applied to the steel.
  • The modified tanto blade shape provides you with a very durable and strong tip, that can also dig, pry, and hammer.
  • The modified tanto blade shape also provides you with a partial belly that isn’t normally found on a tanto blade.
  • The steel handle is durable and strong.
  • The handle is also very resistant to rusting and corroding.
  • The pocket clip is reversible in four different directions, helping to make this knife ambidextrous friendly.
  • The flipper mechanism is efficient while keeping your hand safe during opening.
  • The flipper mechanism allows you to open your knife with just one hand.
  • The Malt sports Kershaw’s SpeedSafe Assisted Opening mechanism
  • The Malt features a Frame Lock, which is a great safety feature.
  • The flipper “fin” is actually a bottle opener, so this knife not only can complete all of your daily tasks, but also help you celebrate with a cold one.

 

The Cons to the Kershaw Malt:

  • The steel chosen for the blade is not a high quality steel.
  • The steel is very soft, so it does not hold an edge for long periods of time.
  • The steel chosen for the blade is not super resistant to corrosion.
  • Because the finish on the blade and handle is a coating finish, it will eventually scratch off.
  • The modified tanto blade shape will allow you to slice some, but it is not going to excel at slicing like a drop or clip point shape would.
  • The steel handle will add significant weight to the Malt.
  • The steel handle is not super grip-y.

 

Conclusion:

Kershaw has been known to break the mold and think outside of the box. They have thought up plenty of innovative ideas that have since become the classic standard in the knife world. Because of this, you know that when you purchase a Kershaw knife, you are getting the most modern ideas and your knife will be able to last a lifetime.

The Malt has been designed as a great everyday knife, with a great blade coating to add corrosion and rust resistant properties. You can get your Malt here. The modified tanto blade shape will help you get almost any job done, and as an extremely strong tip. The steel handle is strong and durable, not likely to rust or corrode any time soon. But one of the best aspects of the Malt is that the flipper “fin” actually doubles as a bottle opener. This knife is truly going to help you with almost any task.

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Own It 4 Piece Set

Looking for a great deal–check out this 4 piece set from Kershaw.  Part of the Own It series, this Limited Edition offering includes four great items from Kershaw, all at an unbelievable price point.

In your set you get the 1304BW assist knife.  This knife opens smooth as silk with a tug on the flipper or a push on the dual thumb studs.  The tanto blade boasts a BlackWash finish that provides an extra layer of protection for the stainless steel blade as well as a fantastic look that doesn’t show wear and tear like many blade finishes.  The blade locks open with a sturdy framelock.  Comes with a tip down, deep carry pocket clip.

Kershaw Own It Set
Kershaw Own It Set

The kit also includes a fantastic LED flashlight that fits comfortable in your hand and can easily be attached to your go bag, your gear bag or anywhere else you want.  The kit has a handy pocket tool that can cut straps, open your favorite drink and even unscrew a stubborn flathead screw.  You also get a bead chain with a dog tag.

All in all, this is a fantastic set of tools for a deal of a price.

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Sale at BladeOps

Looking for a new Kershaw?  Check out our unbelievable sale going on from today until Labor Day.

 

-View Online -Forward


 

BladeOps always brings you the best deals

To celebrate Labor Day we are putting all Kershaw Knives on sale.  Get 20% off every Kershaw knife using coupon code LABOR.   This coupon is good until 09/01/2014 and is not valid where prohibited or with any other coupon.  * This coupon is good for any and all Kershaw knives, does not include Zero Tolerance Knives.





CQC-3K

Classic Emerson knife produced by Kershaw.  Boasts the “wave feature” for lightning fast deployment.


Buy Now

Cryo Assist

Hinderer designed assist knife with grey titanium carbo nitride coat on handle and blade


Buy Now

Injection 3.0

Rexford designed folder with clean lines and a razor sharp blade.  Built for serious EDC.


Buy Now

Limited Blur

Limited edition Blur assist knife with Carpenter BDZ1 blade steel and dual anodized handle.


Buy Now


Home: www.bladeops.com
Email: sales@bladeops.com
Phone: 1.888.392.5233
-
Facebook Twitter


Copyright © 2014 BladeOps, LLC.

BladeOps, LLC, 1352 West 7800 South, West Jordan, UT 84088

You are currently signed up to Company’s newsletters. To unsubscribe click here

 

Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram

Kershaw Emerson CQC-2K Knife Review

Kershaw Emerson CQC2K, Front View
Kershaw Emerson CQC2K, Front View

The Kershaw Emerson collaboration series features classic Emerson style knives with the production quality of a Kershaw.  With the release of the CQC-2K stinger knife, you get a quick deploying blade, a comfortable handle that ensures a solid grip, as well as a unique opening system.

The 2 3/4″ blade on this knife boasts a modified clip point with a slight recurve.  The recurve makes pull cuts a breeze especially when cutting straps, rope and string.  The outward curve of the belly “holds” the item to be cut and allows the blade to slice through it with greater ease when making pull cuts.  The clip point gives greater strength to the tip of the blade when making piercing cuts.

The blade on this Kershaw knife is 8Cr13MoV stainless steel with a black oxide coat that gives even more corrosion and wear resistance to an already great blade steel.  The blade will be relatively easy to sharpen—I would call it an 9 of 10 on ease of sharpening scale– and should keep a fine edge under heavy use for a reasonable amount of time.  Sharpening the blade will require a small bit of skill to sharpen along the recurve edge.  The recurve isn’t overly aggressive and shouldn’t present much of a problem to any but the absolute novice knife sharpener.

Blade locks in place with a seriously secure frame lock.  The pivot pin can be adjusted with a normal flat screwdriver.  The knife comes a bit stiff out of the box.  I actually prefer this on a manual folder so that the blade doesn’t flop open without cause.  You can loosen the pivot a bit and make it for a “looser” open if you prefer.  The blade does have a ball detent that keeps it “locked” in place when the blade is in the closed position.

To open the blade with the Emerson “wave feature” you just the knife out of your pocket and at the same time pull it backwards toward the area behind you.  As you do this, the “wave feature” hook catches on the edge of your pocket and pulls the blade into the open and frame locked position.  Done properly, this method of pocket retrieval® is simple and quick.  In fact, done right this knife opens faster than most automatic knives because the blade is deployed as soon as you have it fully out of your pocket as opposed to most auto knives that require you to withdraw them from your pocket and then press the fire button.

Kershaw Emerson 6024BLK
Kershaw Emerson 6024BLK, Back View

The handle has a black G10 front scale and a 410 black oxide finished back scale.  There is a nice, deep yet gentle finger groove for your forefinger that is followed by a long curve for the rest of your fingers.  This is a relatively small knife which means that for someone with extremely large hands it may feel too small.  For average to large hands the size should be just right.  Some mild jimping is found on the spine of the handle scales for a bit of extra grip.

Tip up right or left pocket clip.  Lanyard hole for alternate carry.

This knife is specifically shaped for serious slicing and piercing.  A fantastic EDC knife for anyone who wants a well built knife that is easy to use and has serious power.  Check out the Kershaw Emerson CQC-2K on our website here and let me know what you think of it below.

SPECIFICATIONS: 

  • Designed by Emerson, built by Kershaw
  • Thumb disk; “waved shaped opening feature”
  • Manual opening
  • Frame lock
  • Reversible pocketclip (left/right)
  • Steel: 8Cr13MoV, black-oxide coating
  • Handle: Textured G-10 front, 410 black-oxide coated back
  • Blade length: 2.75 in. (7 cm)
  • Closed length: 3.6 in. (9.1 cm)
  • Weight: 2.8 oz. (79.4 g)
Facebooktwitterpinterest
Facebooktwitteryoutubeinstagram