Microtech Knives, Inc. is a knife manufacturing company that is famous, but especially famous for their automatic knives. This company was founded in Vero Beach, Florida and 1994 in Anthony and Susan Marfione’s apartment. They operated in Florida until 2005, when they relocated to Bradford Pennsylvania. Then, in 2009 they opened another manufacturing building in North Carolina, to speed up production.
Although they are most famous for their tactical automatic knives, they do produce many styles of blades such as kitchen knives, fishing knives, arrow heads, and balisong knives. The most popular designs among collectors are their Out the Front and Double Action automatic knives. Microtech, along with Benchmade Knives, were responsible for the resurgence in the popularity of tactical automatic knives in the 1990s. Before this knife, these knives were seen more as a precision made tool utilizing powerful springs and high grade bushings as opposed to cheap import.
The company has long promoted itself as stressing quality with regard to tight machining tolerances, to within one thousandth of an inch Microtech has designed knives for use by the US Military, such as the HALO, UDT, SOCOM, and Currahee models. Microtech has collaborated with famous knife makers and designers such as Ernest Emerson, Bob Terzuola, Mick Strider, Walter Brend, Mike Turber, Greg Lightfoot, and Reese Weiland on exclusive designs. Greg Lightfoot, along with other custom knife makers, has remarked that it is the tolerances that Microtech sticks with that makes the factory knives so close to the custom design.
For over 20 years, Microtech has been working to build a long-standing tradition of innovation and quality with each knife that leaves our facility. In a world of ever-changing technology, Microtech strives to ensure their customers have access to the latest advancements in knife making, while still maintaining a humanize element throughout the manufacturing process. As the company continues to grow, their focus has remained the same: to deliver revolutionary products that exceed the industry’s ever-increasing desire for groundbreaking ideas. They always appreciate their customers, for not only the loyalty and support, but also for motivating Microtech to better themselves so that they can continue to rise above your expectations.
Today, we will be going over the Microtech Cypher blade, which is Out the Front automatic knife. This knife is a collaboration between Anthony Marfione and D.C. Munroe. This knife features Microtech’s trademark exceptional detailing and their perfect craftsmanship. This knife is unique, featuring a build that is not only durable, but also stylish.
The blade on the Cypher has been made out of M390 stainless steel. This is a super steel, so it is definitely an ultra-premium steel. This steel is manufactured by Bohler-Uddeholm, which is a merger of Austrian Bohler and Swedish Uddeholm. This steel uses third generation powder metal technology and this steel was actually developed specifically for knife blades. Because of this, the manufacturer developed the steel with excellent corrosion resistance and with a very high hardness as well as excellent wear resistance. The manufacturer has added chromium, molybdenum, vanadium, and tungsten to promote the sharpness and outstanding edge retention. In this steel, most of the carbides are formed by vanadium and molybdenum, which does leave more “free chromium” to help fight corrosion. M390 steel hardens to a 60-62 HRC. This stainless steel is pretty difficult to sharpen, but it won’t require a master sharpener to get a fine edge on it.
The blade on the Cypher has been finished with a stonewashing. With this finish style, the blade is literally rolled with pebbles and then smoothed out. This finish is rugged, manly, and looks well-worn. When the blade is rolled in pebbles, it creates a very textured look which helps to hide scratches and smudges better than other finish styles. Depending on the manufacturer, a stonewash finish can often look satin from a distance. The stonewash finish works to preserve the look of the blade overtime and even hides fingerprints on the blade, which means that you will have to polish it less than other finish styles. This is one of the lowest maintenance blade finishes that you can come across.
This OTF blade is a drop point style blade. The drop point is a blade shape that is used on so many knives, especially in today’s market. This blade shape is going to be found most on hunting knives. The blade on this knife slopes on the spine of the blade form the handle of the knife to the tip of the blade. This allows the spine of the blade to continue forward to the tip of the blade. This way, the point is also aligned with the center axis of the knife, eliminating any pitch momentum when you are stabbing. The curve on the top of the drop point blade is always convex, which is what distinguishes it from the clip point blade. The drop point and the clip point blades are often confused with each other, but there are a variety of differences. For starters, the drop point blade has a lowered point, but the tip is broad. This broad tip is what provides you with the strength that you get with a drop point blade, however, because it is so broad, it does take away from your stabbing capabilities almost completely. A clip point blade also has a lowered tip, but on this blade shape, the tip is very fine and sharp. This gives you full capabilities of stabbing, but unfortunately, it does take away the strength of the tip. The clip point is weak and very prone to snapping. They are both very popular knife blade shapes and are both very versatile. The drop point blade shape is the stronger blade shape though, which makes it the perfect option or the Microtech Cypher. The Cypher does not have as big of a belly as most drop points, but it is still very capable of slicing, because it does still have a slight belly, instead of a straight edge.
This blade is a plain edge, which gives it the ability to take on a wider variety of tasks than a serrated edged blade. The plain edge does provide you with much cleaner cuts than you would get with a serrated blade. The grind on this knife is a hollow grind. This is a common grind where a convex hollow is removed from both sides of the edge. It produces a very sharp edge but being so thin the edge is more prone to rolling or damage than other grinds. It is unsuited for heavy chopping or cutting hard materials.
The handle on this knife is made out of 6061-T6 Aluminum that has been
anodized black. Aluminum is a very low-density metal used in knife making and is also very corrosion resistant. Since it is such a soft metal, it is primarily used in knife handles and sometimes hard anodized for aesthetics and wear resistance. A fun fact about aluminum is that it is actually the most abundant metal in the earth’s crust. This alloy of aluminum means that the type of aluminum is 6061 and it is T6 tempered. 6061-T6 aluminum has one of the highest yield and tensile strengths of all aluminum alloys. 6061-T6 is used extensively in aircraft, and is often referred to as “aircraft aluminum”. Aluminum alloy is cheaper to machine and produce than Titanium, and is lighter, weaker, and less resistant to wear. For the most part, Aluminum is an inferior metal to Titanium aside from its lightness. However, when producing complex knives that require a large amount of CNC machining, such as the case with automatic knives, aluminum is much cheaper to produce and the material costs less.
Hard anodized aluminum is an anodizing technique that creates an oxidation layer on the aluminum that is up to 30% harder than some stainless steels. Anodizing aluminum involves placing the aluminum in a bath of acid and passing electrical charges through the material. This builds up a layer of aluminum oxide on the outside of the aluminum. This anodization process makes the aluminum more durable, corrosion resistant, and wear resistant. This anodization process helps to make the aluminum act a little more like titanium.
The handle is mostly rectangular, but there are some curves to make this a more comfortable handle to hold. There are a series of ridges carved down the length of the knife. There is a shallow finger groove at the top to give you a secure place to rest your finger. The butt of the handle is triangular, which means there is a slight point that you could use as a hammer if the situation arises.
The Pocket Clip:
The pocket clip on this knife is statically designed for tip down carry only on the traditional side of the handle. This knife does have standard tri-winged hardware. All of the hardware is silver, with the cli being a matte grey. The pocket clip has the same grooves carved into the length as the handle does.
This Microtech knife is an automatic out-the-front knife, or OTF. This is a pocket knife with a blade that opens and closes through a hole in one end of the handle. This is very different than the majority of knives that have the blade fold out of the side of the handle. OTF only refers to the basic portion of the knife’s mechanical operation where the blade slides parallel with the handle to deploy. But then, OTF knives can be even further divided into either a manual knife or an automatic knife. The Cypher is an automatic knife, which means the blade travels within an internal channel in the same manner as a manual slider knife. But, the automatic main spring drive and button mechanism enclosed within requires a switchblade handle to be thicker or longer than a similar sized gravity OTF knife. Then, automatic OTF knives can be even further subdivided into either a single action or a double action. This knife is a double action automatic OTF knife. This means that the blade will deploy and retract with a multifunction handle slide. If it were a single action automatic OTF, the knife would deploy automatically, but it must be manually cocked or retracted to close.
The blade on this knife measures in at 4 inches long, with the handle measuring in at 5.625 inches long. The overall length of the Cypher is 9.625 inches long. The knife weighs in at 4 ounces. This knife was made in the United States of America.
The Cypher finally found its way from the custom factory of MCK to the production side to add to the army of double action out-the-front models that Microtech has been manufacturing for over 20 years. Like the Sigil, this automatic is a collaboration with Anthony Marfione and D.C. Munroe and features a “stepped” milling pattern that is both futuristic and functional. Each Microtech OTF knife has extremely sophisticated internal mechanisms which improve the overall operational functionality and reliability. This model, the 241-10, features a black anodized aluminum handle, standard tri-winged hardware, a drop point style blade in a stonewash finish and the pocket clip is statically designed for tip down carry only on the traditional side of the handle. The M390 steel is very resistant to corrosion as well as being very tough, which means that this knife is going to be able to take on those tougher tasks. However, this is a collector’s knife, so you probably won’t be using it for a wide variety of tasks. The aluminum handle is durable and also very corrosion resistant. The anodization process makes this knife even more durable, and the color cannot be scratched off, because it becomes part of the metal. The materials and manufacturing processes used make this collector knife a sleek, unique, and tough knife. Pick up your Microtech 241-10 Cypher S/E OTF Automatic knife with the stonewashed blade today at BladeOps. You won’t regret it.